MOTUL STABILIS 9120 Soğutma Sıvısı 20 Litre
0 Yorum Yap / Yorumları Oku
KARGO BİZDEN
7.899,43 TL
*2.633,14 TL den başlayan taksitlerle!
DESCRIPTION
MOTUL STABILIS 9120 is a water soluble metalworking fluid concentrate dedicated for general machining of copper alloys, cast iron, steel and standard aluminum alloys.
Thanks to its special formulation, MOTUL STABILIS 9120 is particularly effective when high lubrication level is needed.
MOTUL STABILIS 9120
BENEFİTS
- Excellent lubricating and cooling properties
- Low foaming product
- Excellent bio stability in use
- Operator friendly
- Cleanliness of working environment
MOTUL STABILIS 9120
HEALTH & SAFETY
- Formaldehydes & formaldehydes releasers free, without boron and DEA
- Glycol ether, nitrites free, without chlorinated and phosphorous additives
- Operator friendly: good dermatological behavior and easy to use
MOTUL STABILIS 9120
RECOMMENDED APPLICATIONS & DILUTIONS OF USE
- General machining of steel: 5-7%
- General machining of non-ferrous alloys: 6-10%
- Heavy duty machining: 8-10%
- Grinding: 4-6%
The refractometer reading must be multiplied by the refractometer factor to arrive at the real concentration.
MOTUL STABILIS 9120 can be used for machining of aluminium and copper alloys. However, we recommend to check the tendency of the alloy to stain before use.
MOTUL STABILIS 9120
TECHNICAL INFORMATION
TYPICAL CHARACTERISTICS |
UNITS |
METHOD |
BIOCOOL 3210 |
Appearance |
|
| Slightly hazy |
Density at 20°C |
| ASTM D4052 | 0.935 |
pH at 5% |
| NFT 60.193 | 9.8 |
Break Point Corrosion | % | IP 287 | 4.5 |
Water Hardness range recommended | ppm |
| 200 - 600 |
Refractometer Factor | | | 0.88 |
INSTRUCTIONS
Before first fill, thoroughly clean the installation with an antiseptic such as Contram CB3. Drain and rinse the system with water.
If no volumetric mixing system is available, slowly pour MOTUL STABILIS 9120 into water while stirring continuously to achieve a correct preparation of the emulsion.
To ensure the best quality of emulsion and maximize the fluid efficiency, consult the Good Practices Handbook - Metalworking Soluble Fluids.
SERVICE AND EQUIPMENT
In addition to its product ranges, MotulTech can provide tools and services for the maintenance and in-use monitoring of your lubricants. Please contact your technical sales representative
IMPORTANT NOTICE
All information and rules about health, safety and the environment are mentioned on the safety data sheet. It provides information about risks, safety procedures and first aid emergency rules. It clarifies all procedures to implement in the case of an accidental spillage, and for the disposal of the product and its effects on the environment.
Our product contains natural additives which are likely to modify the colour of the concentrates without altering its performance. The specifications of our products are definite only at the time of order, and are subject to our general sale and guarantee conditions. To give our customers the latest technical developments, the general characteristics of our products may vary.
Bu ürüne ilk yorumu siz yapın!